que Wifi me compro ?

hi, Airport Extreme 11n Wireless Card for G3/G4/G5 Mac OS X
Airport Compatible 802.11b/g 54Mbps Wireless LAN PCI Card For APPLE POWERMAC Fit into the PCI slot in your Powermac Recognized as Airport Extreme card under MAC OS X

Features:

* Apple Airport Extreme card alternative, recognize as Airport Extreme 802.11G card under MAC OS
* Airport software compatible, no driver install required under MAC OS X
* Compatible with the both 802.11g / b wireless standard
* High-Speed Wireless data rate up to 54Mbps
* 54 Mbps standard 802.11g wireless internet access
* Complies with 2.4GHz 802.11g Standard
* Complies with PCI 2.2 Standard
* Data Rate up to 54Mbps, auto fallback under noisy environment
* Works with all standard 802.11g and 802.11b wireless routers and access points
* Hardware-based 40/64-bit & 128-bit WEP encryption
* Advanced Wireless Security-64/128/256-bit WEP, WPA (TKIP, IEEE802.1X), and AES
* Wide Range Antenna technology allows wireless access at ranges greater than ever before
* Up to 1312 Feet Range (400 Meters)
* Supports peer-to-peer communication among any wireless users, no Access Point required
* Automatic fallback increases data security and reliability
* Supports other operating system: Windows 98SE/Me/2000/XP/VISTA
* Auto Site Scan and multiple Profile settings

Compatibile Macs

Power Macintosh G3s: Beige, Blue & White, All-in-one.

Power Macintosh G4s: All Except G4 Cube.

Power Macintosh G5s: All except dual-core G5s. Dual-core G5s were produced after September 2005 and have PCI Express slots which are not compatible with traditional PCI cards. If you have a dual-core G5, we recommend our 11n USB Stick.

enjoy

TG123g working fine,

Installing the Thomson TG123g Wireless Adapter - OS X


1. Click here to download the installation to your desktop.

2. When the download finishes, double click on its icon and a new folder will be created called Realtek_RTL8187B_MacOS10.4_Driver_1117_U I_1.5.1A.

3. Open this folder and double click on Install.mpkg icon to start installing the software..

4. After a few seconds you'll see this welcome screen, click Continue.



5. Next you'll see a summary of the instructions to install your adapter. As you're following this guide you can ignore this, click Continue.



6. Choose your language, click Continue, and then Agree.



7. Next, choose the hard drive (destination volume) to install the software to. We recommend leaving this as your system drive - Macintosh HD. Click Continue.



8. On the next screen, click Install and you'll be asked to enter your computer account password. Do this and click OK.



9. Your computer will restart when the installation completes, so make sure any open work is saved and press Continue Installation. When it's finished you'll see the screen below, press Restart.



Connecting the Adapter

1. When your computer has restarted connect the Wireless Adapter into one of the USB ports on your computer.

2. The wireless adapter software should appear in your Quick Launch bar:


3. Before you can connect to your wireless network, you'll need to turn the adapter on, so go to Apple Menu and choose System Preferences.




4. Choose Network from the System Preferences Window.



5. Choose your Wireless Adapter from the Location Menu, this should be listed as Ethernet Adaptor (en1 or 2).

If you're using Mac OS X 10.5 select Ethernet Adaptor (en1 or 2) from the menu on the left and click Advanced.





6. Choose Using DHCP from the Configure IPv4 menu, press Apply Now and close the Network window.



Connecting to your wireless network

Now you can connect your computer to your wireless network.

1. Open the wireless adapter software from your quick launch bar, and select Available Network. Your computer will scan the area and show you all the networks it detects. If you don't see anything, click Refresh. The name of each network is shown in the SSID column. Click on your network so it's highlighted and press Connect. On the Thomson 585v7 router, the SSID you'll need is printed on the bottom of the router.



2. If you're connecting to your Thomson 585v7 for the first time, change Network Authentication to WPA_PSK, enter the WPA PSK key (printed on the bottom of the router) in each Network key box and press OK.



3. Your computer will connect to your wireless network.




enjoy

ok ,gracias por la info lo tendre en cuenta si no puedo instalar esta que tengo !

estoy aun buscando como instalar la RTL8187B ....aver si consiguo que aparezca en preferencia sistema/red.......

sin ti ya no habria seguido con hackintosh....thanks

no va ! pdoria ser que tengo que pasar en 32bits....ya que estoy en 64

por lo que he leido hay que modificar el archivo que esta en EXTRA / com.apple.Boot.plist

pero no se que hacer ???

ya estoy en 32bits ! pero aún no veo la usb wifi en preferencia sistema/red....solo aparece VPN ,PPPoE y 6a4....nada de wifi

tal vez falta un parametro ?

Bien, . . .
No se si habras solucionado el tema del Wifi en tu equipo . . .

Como podras ver en mi firma utilizo una placa P5W DH dl, esta equipada con un Wifi integrado Realtek 8187, en leopard 10.5.X no tenia problemas con los drivers, pero al pasar a SL dejaron de funcionarme y me quede sin Wifi Integrado.

Al principio le coloque al equipo una tarjeta PCI que tenia dando vueltas por casa y que tenia referencias de que funcionaria bien segun habia visto por algun foro:

10.5.1 Hardware Compatibility Lists: Components -->Network Cards --> Wireless

PCI-Card 802.11a/b/g/n D-Link A-547 v1.10(E) Working OOB, detected as AirPort

Me costo + o - 20 a 25€

Instale en Nativo y me la reconocio perfectamente y va muy bien.

Despues encontre un driver para USB Realtek 8187

lo instale y . . . el USB integrado de la P5W DH dl, cobro vida nuevamente, ahora como dispongo de discos extraibles, tengo instalaciones con Airport (tarjeta PCI) o Realtek (USB integrado en placa), de todas formas me planteo desinstalar la PCI y dejarla nuevamente en la reserva ya que el USB integrado funciona bien.

Puedes probar cualquiera de los dos caminos y espero que vaya bien

Saludos

gracias por las indicaciones ! lo he probado con tu driver ...pero no me va !

se instala , reinicio , conecto mi usb ...y me sale el messaje como que no hay kext en la carpeta y que tengo que instalar los ultomos del fabricante....