TG123g working fine,
Installing the Thomson TG123g Wireless Adapter - OS X
1. Click here to download the installation
to your desktop.
2. When the download finishes, double click on its icon and a new folder will be created called Realtek_RTL8187B_MacOS10.4_Driver_1117_UI_1.5.1A.
3. Open this folder and double click on Install.mpkg icon to start installing the software..
4. After a few seconds you'll see this welcome screen, click Continue.
5. Next you'll see a summary of the instructions to install your adapter. As you're following this guide you can ignore this, click Continue.
6. Choose your language, click Continue, and then Agree.
7. Next, choose the hard drive (destination volume) to install the software to. We recommend leaving this as your system drive - Macintosh HD. Click Continue.
8. On the next screen, click Install and you'll be asked to enter your computer account password. Do this and click OK.
9. Your computer will restart when the installation completes, so make sure any open work is saved and press Continue Installation. When it's finished you'll see the screen below,
press Restart.
Connecting the Adapter
1. When your computer has restarted connect the Wireless Adapter into one of the USB ports on your computer.
2. The wireless adapter software should appear in your Quick Launch bar:
3. Before you can connect to your wireless network, you'll need to turn the adapter on, so go to Apple Menu and choose System Preferences.
4. Choose
Network from the System Preferences Window.
5. Choose your Wireless Adapter from the Location Menu, this should be listed as Ethernet Adaptor (en1 or 2).
If you're using Mac OS X 10.5 select Ethernet Adaptor (en1 or 2) from the menu on the left and click Advanced.
6. Choose
Using DHCP from the
Configure IPv4 menu, press Apply Now and close the Network window.
Connecting to your wireless network
Now you can connect your computer to your wireless network.
1. Open the wireless adapter software from your quick launch bar, and select Available Network. Your computer will scan the area and show you all the networks it detects. If you don't see anything, click Refresh. The name of each network is shown in the SSID column. Click on your network so it's highlighted and press Connect. On the Thomson 585v7 router, the SSID you'll need is printed on the bottom of the router.
2. If you're connecting to your Thomson 585v7 for the first time, change Network Authentication to WPA_PSK, enter the WPA PSK key (printed on the bottom of the router) in each Network key box and press OK.
3. Your computer will connect to your wireless network.
enjoy