hello i just try to install the iatkos s3 v2 and i choose the options i see on this webside and those was
"installed from iAtkos S3 v2
Boot with "-v busratio=20" I used PCEFI as a bootloader. Do not use the RTC drivers. The x64 one causes a kernel panic and you don't want to run 32 bit. Be sure to use the AHCI driver and set your bios to AHCI/RAID. You do not need to make a dsdt.aml".
after i get isntalled, when i choose the snow leopard i get this message
efi_inject_get_devprop_string NULL trying stringdata
and then appear the apple symbol, tell me that i have to restart, so it cant initiate the mac osx, any ideas please... also i take out the dvd and start windows automatically , didnt show to choose os , please need your help please please..
_____________________________________
processor: intel i7 920 2.7
motherboard: intel dx58so
ram: 6gb ddr3
videocard: gtx 470
"installed from iAtkos S3 v2
Boot with "-v busratio=20" I used PCEFI as a bootloader. Do not use the RTC drivers. The x64 one causes a kernel panic and you don't want to run 32 bit. Be sure to use the AHCI driver and set your bios to AHCI/RAID. You do not need to make a dsdt.aml".
after i get isntalled, when i choose the snow leopard i get this message
efi_inject_get_devprop_string NULL trying stringdata
and then appear the apple symbol, tell me that i have to restart, so it cant initiate the mac osx, any ideas please... also i take out the dvd and start windows automatically , didnt show to choose os , please need your help please please..
_____________________________________
processor: intel i7 920 2.7
motherboard: intel dx58so
ram: 6gb ddr3
videocard: gtx 470